Error in data transfer

10-11  Source: Network gathering  Views:0 

Advertisement
Default contact does not exist in the BP contacs list (OCRD Aplication defined or objet defined error 65171
Hello ...
The problem happens because in the template Business Partner, you indicate a contact in the field Contactperson, but you also upload it to fill that field in the template contacts (ContactEmployees).
The last template is filled with SN contacts (may have more than one per BP). Most importantly RecordKey fill the field which is the liaison between the BP and its contacts, and field LineNum, which filled with zeros (if a single BP has a contact) and if an BP has more of an BP (eg 3 ), you should complete as 0,1,2.
For the understanding of the subject is at 100%, is exactly what happens if you manually create an BP, as you will see that you can not directly enter a contact in the general tab, it should be entered in the contacts tab.
I hope it will help
Best regards,
Edited by: Paul Ponce on Jan 6, 2010 6:08 PM
Related articles
  • Error in Data Transfer Process (DTP) Urgent! 10-11

    Hi, ive encountered an error in uploading data from R3 using DTP in a specific cube and it says "Exceptions in Subset: Load and Generation" and "Dump: ABAP/4 processor: MESSAGE_TYPE_X", how can i fix this problem? is there any problem

  • Errors in data transfer process 10-11

    Hi,   i'm getting "Errors in data transfer process" message when i try to run conntrans. when i see the detials error log in trouble shooting ( in client console), i get this following message in detials ( see the bold letters). can some one hel

  • Error during data transfer from Lotus Notes to SAP via JCO - Urgent Help Required 10-11

    Dear SAP Expert: I need your help! Recently getting error during data transfer to SAP. I need your suggestion! I am transferring Lotus Notes data to SAP via JCO, recently getting the below error msg, could you pls tell me what could be the reason? Pl

  • Error with data transfer configuration in solution manager 10-11

    Dear SAP Support i have a problem when i enter a tcode solution_manager > goto > data transfer configuration in my sap solutin manager system. the error appear The requested URL could not be retrieved While trying to retrieve the URL: http://solman.

  • Error in data transfer using CIF 10-11

    Hi all, I am just clueless. I am trying to transfer master data from ERP to EWM but it ain't happening. It is throwing out this error. System:    P6QCLNT800    User:  RFC_USER_1 12/11/2010 Function/Q/SAPAPO/CIF_LOC_INBOUND Text:        Internal error

  • Error in Data Transfer : From CO-PA to SOP Flexible Planning 10-11

    Hi Friends I am working on a Scenario of Transferring CO-PA data to Flexible Planning, I am encountering few problems, I have done the followig steps, request you to check and get back to me.. The following configuration steps are done with Example;

  • Error in Data transfer ECC to APO 10-11

    Hello Guys, I'm getting an error in my system when I try to transfer data from ECC to APO system. When I CIF (after generating IM, when I activate it)  older data (master data created previously in system), I'm getting a short dump with mesage class

  • Error with data transfer in functional module 10-11

    Hi all, I need to upload file to the employee through BDS. (oaor transcation).  i am using functional module function zin_bds_dms_upload. ""Local Interface: *"  IMPORTING *"     VALUE(P_CLASS) TYPE  BDN_CON-CLASSNAME *"     VALUE(

  • Error in data transfer process 10-11

    Hi,    Can any one tell me whats the cause of error coming in DTP's process and that too in HEADER tab?It shows red in technical status although data is loaded in the target. Regards, SanyuktaHi Sanyakta, if the status is red there is error in loadin

  • Error in Data Transfer Process (DTP) 10-11

    Hi, ive encountered an error in uploading data from R3 using DTP in a specific cube and it says "Exceptions in Subset: Load and Generation" and "Dump: ABAP/4 processor: MESSAGE_TYPE_X", how can i fix this problem? is there any problem

  • Deployment '2700002' to target 'tar152' encountered a system level deployment error during data transfer. 11-30

    Hi All, I got this error in atg bcc on UI and console as well when i doing full deployment. I triyed through snap-shot id but i think this is different issue. So please tell me where is problem happend. Thanks in Advance. --Kakasaheb.Are you working

  • Early Watch Session overdue - Error in Data Transfer 10-11

    Hi folks, in my solution, the Early Watch Reports from the productive system are labeled overdue (with a red flag). It says that there is no data transmitted from SDCC. When calling SDCC manually, it says that I don't have the necessary authorisation

  • Error in data transfer 10-11

    Default contact does not exist in the BP contacs list (OCRD Aplication defined or objet defined error 65171Hello ... The problem happens because in the template Business Partner, you indicate a contact in the field Contactperson, but you also upload

  • Error while executing Initialize with Data Transfer for 0FI_GL_10 10-11

    Hello All, Post Pre prod refresh, our timestamp for the datasource 0FI_GL_10 got reset. Due to which our deltas did not bring any records to the BW system. First we did an Initialize without data transfer for all the BW related datasources. The delta

  • Error 33172 occurred at Read & Write data transfer between two or more PF2010 controller 10-11

    Hi,i need to do data transfer between two or more FP2010 controller.e.g. FP2010(A) & FP2010(B). FP2010(A) need to transfer the measurement (from its I/O module) to FP2010(B) to do the data analysis.These data transfer should be synchronous btw two co

  • Data transfer schedule run error-object variable/with block variable no set 10-11

    I want to automate a Data Transfer Workbench routine. I created the appropriate xml file but when I run the .bat file I get the following error: "Object variable or with variable not set." I think that the problem resides in the xml file but the

  • Start Data Transfer Aborted Activity Error 10-11

    We got an error in phase Start Data Transfer Runtime Errors         CONNE_IMPORT_WRONG_COMP_LENG Short text     Error when attempting to IMPORT object "<LT_PORTION>". This is from TDMS --- Table TPMP: Access plan: 00004 Writing behavior: 1

  • Error in the Data Transfer phase 11-30

    Dear all, During the Data Transfer phase, we get 117 errors. The error for each failed process is: Execution of program /1CADMC/OLC_500000000043327 failed, return code               3 Message no. DMC_RT_MSG046 RC = 3: Error writing the data I compare

  • Data transfer with some errors on registers. (Novice question) 11-30

    Hi experts. First of all i wat to say that i'm realtively novice in BW. I have an ods object.  I have a transformation>Data Transfer Processes>Infopackage to load data to it. I execute this with a process chain. well the roblem is that some register

  • Error in KEFC transaction - External Data Transfer 11-30

    I am getting this error while using external data transfer function using KEFC. Plan version is not supported -> check your entry Message no. KG 029 Diagnosis Plan version"xx" has not been created in operating concern"xxxx" Procedur