HTTP Post in HTTP adapter

10-11  Source: Network gathering  Views:2 

Advertisement
Hi,
We are developing one interface in which sender Torex system sends message in "HTTP Post" format.
In this sender application wants the url in following format.
http://server:port/sap/xi/adapter_plain?service=<xxx>&namespace=<xxx>&interface=<xxx>&sap-user=<xxx>&sap-password=<xxx>&qos=BE&ProductID=000000000000000216&uid=500014&deviceID=0725&StoreID=0004
In above "HTTP Post" format data has been sent in url without body of message.
I know the option in below blog.
https://weblogs.sdn.sap.com/pub/wlg/13639
But is there any other solution for this?
xml payload for above message is as below.
<?xml version="1.0" encoding="UTF-8"?>
<ns0:interface xmlns:ns0="namespace">
   <ProductID>000000000000000216</ProductID>
   <UID/>
   <DeviceID/>
   <StoreID>0004</StoreID>
</ns0:ExternalStockLocator_Retail_REQ>
Thanks
Edited by: darshana-PI on Feb 10, 2012 9:37 PM
Hello,
http://server:port/sap/xi/adapter_plain?service=<xxx>&namespace=<xxx>&interface=<xxx>&sap-user=<xxx>&sap-password=<xxx>&qos=BE&ProductID=000000000000000216&uid=500014&deviceID=0725&StoreID=0004
In above "HTTP Post" format data has been sent in url without body of message.
Please remember that when creating a sender/receiver using the Plain HTTP Adapter, the following are automatically filled out
Transport Protocol: HTTP 1.0, Message Protocol: XI Payload in HTTP Body. The transport protocol means that only HTTP 1.0 is supported and that for it to work, an HTTP Body is required.
Hope this helps,
Mark
Related articles
  • HTTP Post in HTTP adapter 10-11

    Hi, We are developing one interface in which sender Torex system sends message in "HTTP Post" format. In this sender application wants the url in following format. http://server:port/sap/xi/adapter_plain?service=<xxx>&namespace=<xxx

  • Mail changes HTTP POST to HTTP GET in HTML attachments? 10-11

    Has anyone else noticed this? I'm using an encrypted e-mail system from Voltage Security (www.voltage.com) and my co-workers swear it used to work on the iPhone prior to iPhone 2.0 firmware. The way the system works is that it sends encrypted content

  • HTTP POST binding not available in 11g??? 10-11

    Hi, I am trying to call a HTTP service using HTTP POST, passing HTTP params to it. I created a small bpel process in 10.1.3.4, and used the HTTP POST samples, which worked out really well. However target platform is 11g. So I just tried to migrate th

  • Connect by HTTP-Post 11-30

    Hi, am i correct if i think that it is not possible to connect to rwservlet via http-post, only http-get. And that is the reason i get REP-56048 when i try it? Thanks. Regards ChrisHi, thanks for this suggestion. It put my on the right way, because i

  • HTTP/S POST from J2SE adapter engine (NO SOAP) 10-11

    Hi there, We have a scenario at work where we have XI sending messages to the "lightweight" J2SE adapter engine in the DMZ....and from there the message is sent out to an HTTPS site that is obvioulsy outside of our network. Currently I can see t

  • How  to config receiver http adapter for HTTP POST without XML tags ?? 11-30

    Hi All, Can you please provide some infornation on How  to config receiver http adapter for HTTP POST (Request) without XML tags ?? Our receiving product doesn't support XML formats. Is there any option to bypass server authentication on the XI? If a

  • XI http-adapter; http-post test tool? 11-30

    Hi All We have following scenario: system A sends data to R/3 through XI, XI's inbound adapter is type http (Syst A -> XI 3.0 -> R/3). Now we need to test the XI's inbound http-adpater. Does anyone have some experience with a tool that can send xml-

  • Is it possible to call a SOAP webservice using HTTP POST adapter 11-30

    Hello Experts, Is it possible to call a webservice using a HTTP adapter with POST method? If yes, how? Regards, DipteeNo this will not work since you have additional SOAP information (i.e. SOAP envelope, security information) in addition to the paylo

  • Maximum HTTP posts to "Plain HTTP" adapter 10-11

    Hello, I am working on some load testing on a development box that we have for a simple synchronous HTTP<>XI<>RFC interface.  I have tested up to around 45 simultaneous users and the XI box starts to reply with 500 Internal Server Errors to th

  • Http post to a url from a WebDynpro (Java) application 10-11

    Hi, I want to send http post parameters to a url from a WebDynpro (Java) component. I need to do this to send OCI catalog data back to SAP SRM. I found this thread: HTTP Post which suggests to use the the Suspend plug for this purpose. <quote> Sendi

  • Not able to send message - http post from MII 12.1.4.53 to PI 7.1 10-11

    Hi , Question u2022     Is there any configuration to set up in MII and PI to do posting to PI as a web service? If YES, please guide. Situation u2022     We are with MII version 12.1.4.53 and trying to send message through http post to PI 7.1 server

  • PL/SQL posting to HTTP request 10-11

    Hi As part of a web application I am developing, I need to generate an HTTP post from a PL/SQL package. The problem I am having is that the message going out is not properly formatted and is being rejected by the listening application (in this case,

  • Issue with Remove Namespace HTTP POST method 10-11

    I am working on an integration where cXML from the Partner will be posted to SOA and from SOA another HTTP post to end partner. its basically HTTP Post(partner 1)----------------->SOA--------------->HTTP Post(Partner 2). I have cXML its in dtd forma

  • HTTP UPLOAD using HTTP receiver adapter 10-11

    Hello Experts, I am facing a problem where i have to upload a file to webserver using POST , I am using a file adapter to pick the file and http or soap adapter to post the file to webserver. Here the request structure expected by the webserver is a

  • HTTP POST from ECC 6.0 to XI 10-11

    On ECC 6.0, I have an XMLstring that I need to post to an external URL.  I need this to go through XI.  It is actually an HTTPS post.  How can this be accomplished?  Can anyone point me in the right direction as far as how this would work in XI?  Her

  • How to handle HTTP-POST encrypted data for ECC Using proxy or RFC 10-11

    I have a scenario HTTP-POST ->PI->ECC.sender is HTTP Post  send encrypted data i need to handle the data and stored in to SAP ECC  with out decrypt using PI .what should i take for receiver  can i use inbound proxy or RFC  and how can handle the enc

  • How to call HTTP Post Method URL in SOA 10g 10-11

    Hi, I have a requirement where i need to call a HTTP Post Method, I have a URL, if i hit it in the browser, i am getting the response details. I know there is a HTTP Binding Adapter in 11g, but we are on 10g. Can anyone please let me know whether we

  • How to call HTTP POST method in SOA 10g 10-11

    Hi, I have a requirement where i need to call a HTTP Post Method, I have a URL, if i hit it in the browser, i am getting the response details. I know there is a HTTP Binding Adapter in 11g, but we are on 10g. Can anyone please let me know whether we

  • Dynamic Header during HTTP post. 10-11

    Hai Experts,     Is there any option to pass source filename which is going to be dynamic(ie any text file with any name ) as a header in HTTP post to a URL? To be more clear on my question I am doing a File to HTTP scenario.In the source directory a

  • Http get to Http post 10-11

    Hello. Currently the Http receiver adapter is configured as HTTP get . We need to change it to HTTP Post and put the parameters in the URL in the body. Can someone please give an example on how to conevert a http get to http post. Is it a simple thin