IDOC to File scenario Configuraton settings

10-11  Source: Network gathering  Views:0 

Advertisement
hi,
   I am doing IDOC to FILE scenario.I am sending IDOC from R/3 to XI and then to XML file.That mean smy scenario is as Follows (  R/3XIfile ) These are my queries
-->I have created RFC Destination from R/3 to XI.should I need to create RFC destination from XI to R/3 ( i mean In  XI )??
-->I have created one Port in R/3 and I have linked that port with RFC Destination that i have created.here i am sending IDOC from R?# to XI...SO we call this PORT as SENDER PORT or RECEIVER PORT??
-->and DO we need to create PORT in XI also??is it require for my scenario??
-->DO we need to create Partner Profiles in XI also??
-->DO we need to create LOgical system in XI to represent the XI system?? (as we created LS in R/3 to represent sender system)
--->Here is my big doubt..
               when we test IDOC ..by sing we19 TCODE,
   We need to fill the corresponding details as below,
Receipent                                  Sender
Port                                              Port
PartnerNo                                      PartnerNo
PartnerType                                   PartnerType
my Doubt is,
-->>In which field we need to specify the Port that we have created in R/3..Receipent side OR Sender Side..?? and Why??
-->>Same for ParnerNo..where we need to specify the Logical system which we have created in R/3 should specify??Why??
Please give reply ASAP..with detailedexplanation..
points will be rewarded..
regards,
murali
HI
SLD-
1) Create a Product/Software Component
2) Technical System pointing to R/3 system
3) Business System for the above technical system
In the Repository
1) Import the Software component created in the sld
2) Create a namespace,
3) import the idoc and then create sender data type/message type etc and mapping
4) Mapping Rules is depends on the requirement
In the Directory
1) Create a Scenario /import the business system
2) Create Receiver/Interface determination
3) Create communication channels for sender and receiver
4) Sender Agreeement and Receiver Agreement.
Then the file adapter configuration is depend on the input file format.
Also you need to have Logical destionation created in the XI , and the IDX1 entry
In R/3 Port, Partner profiles etc should be created
Have a look into this document~
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/877c0d53-0801-0010-3bb0-e38d5ecd352c
While doing an File -> XI -> IDoc scenario, The Points to noted are:
1. You donu2019t need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
2. You import the IDOC and use the same in your mapping.
3. In this configuration note that you will need a sender agreement for the file.
4. In this configuration note that you will also need a receiver agreement for the IDOC.
For any File -> XI -> IDoc scenario ref:
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
While doing an File -> XI -> IDoc scenario, The Points to noted are:
1. You donu2019t need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
2. You import the IDOC and use the same in your mapping.
3. In this configuration note that you will need a sender agreement for the file.
4. In this configuration note that you will also need a receiver agreement for the IDOC.
For any File -> XI -> IDoc scenario ref:
/people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii
/people/sravya.talanki2/blog/2006/12/25/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-i
/people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
In SLD u2013 System Landscape Directory
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
In Transaction SALE
Define and Assign the logical system names
cheers
reward poins if found useful
Related articles
  • IDOC to File scenario Configuraton settings 10-11

    hi,    I am doing IDOC to FILE scenario.I am sending IDOC from R/3 to XI and then to XML file.That mean smy scenario is as Follows (  R/3XIfile ) These are my queries -->I have created RFC Destination from R/3 to XI.should I need to create RFC destin

  • Error/Doubts in Idoc-XI-File scenario 10-11

    Dear All, I am doing one scenario in which DELIVERY idoc is posted from R/3 to XI and then from XI that idoc is to be sent as flat file to one local folder. For this scenario, I have done all ALE settings and I am able to see the idoc in XI in cXML f

  • PI 7.1 scenario -- File to File , File to IDOC  and IDoc to File Scenario 10-11

    Hi All, *I have PI 7.0 . I have in that File to File , File to IDOC  and IDoc to File Scenarios* File to File -- This scenario is working fine. File to IDOC   --  Setting done in PI 7.0 like SM59,  IDXI, IDX2  and in R/3 like SALE (logical system)---

  • Issues in IDOC to File scenario using bussiness service 10-11

    Hi Team I found a blog which explains about the IDOC to FILE scenario by using bussinss services. I followed the steps and finally i am getting a error message while posting an idoc in we19 (ie IDOC 09878 was saved but cannot or should not be sent). 

  • Issues in SAP(Idoc)-XI-File scenario 10-11

    Dear All, I am working on SAP(Idoc)-XI-File scenario. But in the Receiver agreement i am not able to see the idoc in order to specify some conditions there.  Please suggest if I have to do any settings in order to specify some conditions in the idoc.

  • Idoc to file scenario general query 10-11

    Hi All, I know about the basic settings needed for the Idoc to file scenario. My query is related the idoc /ALE settings. I have a scenatio wrking in my system where we have configured the port for B type partner and also the port as XML-HTTP I can n

  • IDOC to File Scenario - Configuration steps need to be done in R3 and XI 10-11

    Hi Experts, I am working with IDoc to File scenario. Can someone please explain, what are the steps or configuration things need to be done in R3 and as well as in XI too. Thanks in advance. Regards, SreeHi Sree, I thought i will just share a few bas

  • How to eliminate empty tags in out put XML file in IDOC to File scenario 10-11

    Hi Experts, I am doing IDOC to File scenario. My Out put XML is in to FTP is as below <ITEMS>     <item>           <A>asdf<A>           <B>GHIJ<B>     </item>     <item>           <A>123<A>      

  • ABOUT DATA SENDING IN idoc TO file SCENARIO 10-11

    How the data is sended in idoc to file scenario? what is the difference in sending data through BD10, BD14 and WE19 ? Is the data is sended through XI OR R/3 SYSTEM?Hi Rammohan >> How the data is sended in idoc to file scenario?      Makeing setting

  • Setup for IDoc-XI-File scenario 10-11

    Hi All,    Please provide info where can I find, step by step  documentation for the basic setup on R/3 and XI areas, before start developing IDoc-XI-File or File-XI-IDoc scenarios. Thank you, SreeHi, While doing an IDOC -> XI -> File scenario, The

  • No message in found in XI in IDOC to FILE scenario 10-11

    Hi everybody,           I am working on a scenario idoc to file. The idoc is sent sucessfully from R/3 , but I am not getting any message in message monitoring in XI.Can anybody help me on this?Hi Bhagyashree, Just see if the file is generated at the

  • Regarding IDOC 2 FILE Scenario 10-11

    Hi Friends,                 please help on IDOC 2 File Scenario. I have done tha ALE settings in R3 system and the Idoc has been  generated out of r3 system. but how it wiil be sent to XI server can any body help me on this issue.make it as quick as

  • Unable to do IDoc to File Scenario ; Please help me.... 11-30

    Hi Experts!!!,                  I am trying to convert an IDoc to an .Txt or .Xml file, But I am un able to do it. Whenever I m trying to configure the Idoc adapter , it's not allowing me to select as "sender" (default it will be on the recvr si

  • IDOC to FILE scenario With Screen shots 11-30

    CAN YOU PLEASE SEND US THE DETAILS OF IDOC to FILE scenario With Screen shots  and do  the needful for meHi Surya, I thought i will just share a few basic thoughts that you need to take care while doing an IDOC to File Scenario. Just see if it helps

  • Can i get IDOC to File scenario Step-by-Step Procedure? 11-30

    can i get IDOC to File scenario Step-by-Step Procedure? please provide me the step-by-step and hole procedure..please. TksHi, Check this blog- IDOC - File scenario /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complet

  • Idoc-xi-file scenario.  how to display file in html format 10-11

    I am not sure whether this is a valid question.........but want to confirm as it was asked by somebody In idoc-xi-file scenario.......  how to display file in html format ?? Thanks in advance KumarHi Vijayakumar, Thanks for your reply !! You mean to

  • In idoc to file scenario, if XI system is down where do idocs pile up? 10-11

    In idoc to file scenario, if XI system is down where do idocs pile up (get stuck) what tcode can I use to reprocess it?Sender System ,Check  BD87 .. you will see alll the IDOCs in Yellow state .. You can reprocess all the IDOCs in go from there .. if

  • FIle Content Conversion Problem in IDOC-XI-File Scenario 10-11

    Dear All, I am doing IDOC-XI-FILE scenario. I am facing one problem related to File Content Coversion.My requirement was to generate a dynamic file like <b>%store_code%_%current_date%_sitemaster.xml</b> , I have completed the dynamic generatio

  • Integration server as logical system in IDoc to file scenario 10-11

    Hi, Will we configure integration server as logical system in IDoc to file scenario or the RFC destination related to the port will be suffice? For which logical system will the outbound partner profile configured? Regards, Gajendra.Hello, I feel tha

  • How to suppress the Acknowledgement  Error in IDOC to File scenario? 10-11

    Hi - I got the status in SXMB_MONI as 'Processed Successfully' for the IDOC to File scenario but the Acknoledgement status throws an error saying 'Acknowledgement not possible'. I read one of the documents in the forums on how to suppress the acknowl